UV A/C Leak Detection Dye 250 ml
UV A/C Leak Detection Dye 250 ml. Can be used in all R-134a, R-12, and R-22 systems. Compatible with all PAG, Ester, and Mineral based refrigerant oils
Meets SAE J2297. For use with UV dye injector and UV light.
UV A/C Leak Detection Dye 250 ml. Can be used in all R-134a, R-12, and R-22 systems. Compatible with all PAG, Ester, and Mineral based refrigerant oils
Meets SAE J2297. For use with UV dye injector and UV light
To measure: Loosen cap on measure chamber and squeeze bottle for desired amount. Single application: (7,5 ml)
Test Procedure:
1. Using A/C system oil injector, inject add (7,5 ml) to oil injector.
2. Follow direction to attach injector and for charging oil/additive into system. DISCONNECT INJECTOR.
3. Run engine/road test with system on MAX A/C to allow leak detector to circulate and penetrate leaks.
4. Inspect with UV light. Leak will appear as “yellow-green” glow at leak source.
Dosage: 1 application (7,5 ml) to 1 A/C system.
| Content | 250 ml |
|---|---|
| Dosage | 1 application (7,5 ml) to 1 A/C system. |
