Rislone Power Steering Repair

Rislone Power Steering Repair is a unique dual cavity bottle containing a combination of the best performance additives to repair the most common power steering fluid related problems. Power Steering Repair can be used to top-off the existing fluid when low, or add a bottle when changing fluid. Works on all vehicles, domestic and import. Compatible with all types of power steering fluid, including petroleum, mineral oil and synthetic formulas. Use one bottle to top off or restore fluid level. Depending on the power steering problem, results will either be immediate or noticeable within 2 (two) days or 200 km of driving.

The common element between all of the power steering components is the fluid. The fluid touches everything inside the pump, gearbox and rack & pinion. This fluid must lubricate, cool, clean and pressurize for the system to function. In newer systems, the power steering fluid can easily perform these functions. As the vehicle ages and gains more miles, the fluid alone can’t do the job. Internally, pumps whine, gears have play in them, valves stick, seals leak and the fluid quickly breaks down. When installed, Rislone Power Steering Repair helps to stop and prevent these problems and enhances the useful life of your power steering system.

DIRECTIONS

• Adding to Power Steering Fluid

Remove power steering dipstick and check reservoir fluid level. Tip. On most vehicles, this is on or near the belt driven power steering pump. Consult owners’ manual for location. If fluid is low, pour equal amounts from the two chambers into reservoir. At least half of bottle should be used. Do not overfill . Tip. If necessary to prevent overfilling, drain or siphon some power steering fluid from reservoir. Check fluid level again. Top off with manufacturer’s recommended power steering fluid as needed. Replace dipstick and drive 5 to 10 minutes to circulate fluid. Depending on the power steering problem, results will either be immediate or noticeable within (2) days or 200 km of driving. In seriously damaged power steering systems, a second treatment may be required. In this case, it is suggested that the power steering fluid be changed and a second application of Power Steering Repair be added.

• Changing Fluid

If using Power Steering Repair when changing power steering fluid, add entire contents of bottle. Then top off with manufacture’s recommended fluid to proper level. Drive vehicle and recheck fluid level.

DOSAGE: One bottle treats 2 to 3 litres of fluid. Forlarger systems use one bottle for every 2.5 litres of capacity.

MOST COMMON POWER STEERING PROBLEMS
Stiff Steering: hard “stiff” steering, sluggish “lazy” steering, morning sickness.
Noise: whining, grinding, squeal.
Fluid Loss “Leaks”: gaskets, O-Rings, seals

THE SOLUTION, RISLONE POWER STEERING REPAIR
Restores steering performance: smoothes out hard steering, reduces sluggish steering, stops morning sickness.
Quiets noise quiets squeal & noisy pumps, reduces friction & wear stabilizes fluid.
Stops leaks: conditions seals & O-Rings, reduces fluid loss, prevents future leaks