TORALIN EGR Valve & Gasoline Air Intake Cleaner

NO DISASSEMBLY REQUIRED! TORALIN EGR & Gasoline Air Intake Cleaner is supplied with a connecting hose and nozzle.

TORALIN EGR Valves & Gasoline Air Intake Cleaner cleans EGR valves, EGR system, combustion chamber, air intake, exhaust valve, injector, intake manifold, throttle and complete intake system. The special chemical composition dissolves deposits with ease yet without costly disassembly. The symptoms of a stuck open EGR valve are stalling, surging, and a rough idle. This stumble is very noticeable. A stuck closed, or restricted EGR valve results in detonation and ping.

Directions:

Please note: a Connection for cleaning the EGR valve & intake system (Plastic Nozzle and Connection Set, Pr.Nr. 91111) is also required before commencing the treatment. This is available separately and is NOT included.

1. Start the engine and let it run until the operating temperature is reached.
2. Localize the air intake closest to the throttle.
3. Connect the end of the transparent hose to the bottle of TORALIN EGR & Gasoline Air Intake Cleaner.
4. Connect the other end of the transparent hose (with the nozzle at the end) to the air intake hose.
5. Start the engine. Let the engine run at a rotational speed of ca. 2000 RPM. Make sure the engine runs evenly.
6. After 1 minute, stop the engine and let the cleaner soak in. (3-4 min.)
7. Repeat step 5 several times until all the cleaner liquid is finished. Stop the engine.
8. Hose off the entire surface with the air hose.
9. Spray the throttle, intake manifold and air supply valve with lubricant spray. Start the engine and let it run idle 2-3 minutes, then turn off the engine again.

Dosage:  1 bottle is sufficient for a passenger car. A second bottle may be required in case of very dirty systems.