Rislone Aluminum Cooling System Stop Leak

Safely Seals Leaks
Stops Overheating
Reduces Water Temperature

Rislone Aluminum Cooling System Stop Leak formulated to permanently seal coolant leaks that are the cause of most overheating problems. Rislone Aluminum Cooling System Stop Leak contains components which stops overheating and reduces water temperature. It is guaranteed to safely and easily seal leaks in plastic, aluminum and metal (copper / steel) radiators, heater cores, gaskets and freeze plugs. Works in cars, trucks, vans, SUV’s and RV’s. Use with all types of coolant including yellow, orange, pink, red, blue and green silicate based & non-silicate based OAT / HOAT antifreeze and/or water.

Direction
NOTE: Cooling systems that are dirty or partially clogged should be flushed before usage.
Allow engine to cool. Make sure engine is cool enough so radiator cap can be safely removed.
2. Shake well. Pour Aluminum Cooling System Stop Leak directly into radiator. One bottle treats systems up to 15 litres. Use ½ bottle for four cylinder engines. If direct access to radiator is not available, install in overflow tank.
3. Fill radiator and overflow tank to proper level and reinstall cap.
4. Drive/idle engine for 10 to 20 minutes. If leak continues, second application may be required or mechanical attention is needed. 5. Leave Rislone Aluminum Cooling System Stop Leak in the cooling system for continued protection.

Dosage: One bottle treats systems up to 15 litres. Use ½ bottle for four cylinder engines.For larger systems, use 1 bottle for every 20 of cooling system capacity.

Use with all types of coolant including yellow, orange, pink, red, blue and green silicate based & non-silicate based OAT / HOAT antifreeze and/or water.It is guaranteed to safely and easily seal leaks in plastic, aluminum and metal (copper / steel) radiators, heater cores, gaskets and freeze plugs.