No-Acid Vehicle A/C System Acid Neutralizer

HOW DOES IT WORK?
The chemical ingredients of NO-ACID actively seek out and neutralise acids. Acids are often caused by moisture, compressor burnout, and refrigerant gas or lubricant breakdown, once injected No-Acid acts immediately, preventing acids from forming.

BENEFITS

• Neutralises and effectively eliminates acid from an A/C system
• Prevents Acids from forming
• Neutralises acids caused by compressor burnout
• Neutralises acids introduced by A/C recovery units
• Safe with all system components
• Ideal for preventative maintenance
• Fast and immediate effect
• Push&Fill System - Inject Directly - Maximum System Port Pressure - 11 bar (160 psi.)

INSTRUCTIONS FOR USE:
Turn the air conditioning or refrigeration system on and set the lowest temperatures.
Unscrew the cap of the Acid Neutralising for AC/R Systems and connect the adapter.
If you use a flexible adapter, push out the air contained in the trasparent hose.
Connect the adapter to the low-pressure charging port of the A/C system and inject the Acid Neutralising for AC/R Systems.
If you are working on a vehicle A/C system without a low-pressure charging port it is necessary to use a special adapter (not included).
If you are using the Acid Neutralising for AC/R Systems in aerosol can it is necessary to repeatedly press and release the can for 6-8 times and keep it pressed for at least 1 minute.
Disconnect the adapter from the A/C system.
Run the A/C System in this condition at least for 30 minutes.

DOSAGE:
Zero to Low Acid Level (pH ≥ 6.8):  add 30 ml (1.0 FL. OZ.) NO-ACID per 2 litre (64 FL. OZ.) of Compressor oil.
Medium Acid Level (6.8 ≥ pH ≥ 5.2): add 30 ml (1.0 FL. OZ.) NO-ACID per 1,5 litre (48 FL. OZ.) of Compressor oil.
High Acid Level (pH ≤ 5.2): add 30 ml (1.0 FL. OZ.) NO-ACID per 0,70 litre (24 FL. OZ.) of Compressor oil.