Engine Oil & Fuel UV Dye 100 ml

Engine oil & Fuel UV eak detection Dye in Measure bottle. For use in engine oil, transmissions, power steering systems, and gas / diesel fuel systems. Compatible with all weights of petroleum based lubricants.

To measure: Loosen cap on measure chamber and squeeze bottle for desired amount.

How to use:
1. Add proper dye application amount to system being tested. (see guide bellow)
2. Run engine/road test to penetrate leaks.
3. Inspect with UV light. Leak will appear as “orange-red” glow at leak source.

Note: Leave leak detector in system; to check repairs, use oil soluble cleaner to remove UV dye and repeat step 2 and 3.
UV Dye Application guide

Dosage: 7.5 ml per 1 liter of oil or 1 liter of fuel.