Call +31 (0) 614392096

Welcome by TORALIN!

 Wholesalers Login      

TORALIN Head Gasket Repair Kit to 10 liters

TORALIN Head Gasket Repair Kit permanently Seals: Cracked Cylinder Heads, blown Head Gaskets, intake Gasket Leaks, all Block Leaks, other Severe Coolant Leaks.
SKU: 61801

Availability: In stock

Excl. Tax: €114.05 Incl. Tax: €138.00

Details

Details

Permanently Seals: Cracked Cylinder Heads; Blown Head Gaskets; Intake Gasket Leaks; All Block Leaks; Other Severe Coolant Leaks; Composite Head Gaskets.
Works On: Gasoline and Diesel Engines, Cast Iron or Aluminum Blocks & Heads, MLS - Multi Layer Steel Gasket, Copper Head Gaskets

How big can a leak get and still be repaired?
Generally, the repair kit can stop a leak and apply a new layer to holes with a diameter of up to 0.75 mm and a groove with a width of up to 0.38 mm.
In order to get a good indication of the size of the leak without having to dismantle any parts, you can leave the engine running for 15 minutes while stationary. If there is no need to add any coolant within this period and the engine does not overheat then your car is a suitable candidate for being treated with this product.

Performing a diagnosis:
Ensure that the coolant level is correct. Leave the car running for 15-20 minutes while stationary.
Check the coolant level. If there is no need to add any coolant and the engine does not overheat, then your car is suitable for treatment.  If you have to add coolant then the car is NOT SUITABLE for the treatment.

We also advise against carrying out the treatment if there is an extreme increase in pressure. Should this be the case then a loss of water will usually occur when the engine is allowed to run for 15 minutes while stationary. If the above does not happen then the car is suitable for being treated.

Directions
STEP 1. Prepares system for sealing by cleaning the entire cooling system including the blown or cracked area where engine contaminants entered the cooling system. A clean cooling system is the foundation for maintaining the proper temperature control necessary to promote the adhesion of TORALIN Head Gasket Repair Kit and insure the longevity of the seal.

 1.  Allow engine to cool. Drain cooling system removing all antifreeze.
 2.  Shake well and add entire bottle of Cooling System Prepare & Cleaner to the radiator.
 3.  Refill system with water and reinstall radiator cap. Start vehicle. After engine reaches normal operating temperature (thermostat opens), run for 10 minutes with heater on high and air conditioning off.
 4.  Turn vehicle off and allow engine to cool. Flush cooling system and reservoir until water runs clear.
 5.  Drain system and move on to Step 2, Head Gasket & Block Sealant.

STEP 2. Sealant penetrates cracks and damaged or blown head gasket area, drying to form a seal stronger than the original head gasket itself. High strength fibers work like rebar in concrete to create a truly permanent seal.
Permanently:
- Seals Cracked Cylinder Heads
- Repairs Blown Head Gaskets
- Stops All Block Leaks

1.Shake well. Mix Head Gasket & Block Sealant in bucket or container with approximately 2 quarts of water. Pour this mixutre directly into the cooling system.
2.Fill cooling system with water and reinstall radiator cap.
3.Turn heater on high and air conditioning off.
4.Start vehicle and run engine until thermostat opens or normal operating temperature is reached.
5.Turn vehicle off and top off cooling system with water when radiator cap can safely be removed. Reinstall radiator cap.
6.Run engine at idle for 15 minutes. Turn vehicle off and allow to cool.
7.Top off cooling system with water as needed an reinstall radiator cap.
8.Run engine at high idle (1500 RPM's) for 20 minutes.
9.Idle engine for 30 minutes. Turn vehicle off and allow to cool.
10.Drain and flush system and move to Step 3, Head Gasket & Block Treatment.

STEP 3. Antifreeze compatible treatment that protects & conditions the head gasket and all cooling system parts sealing and preventing future leaks.

1.Shake well. Pour Head Gasket & Block Treatment directly into radiator.
2.Refill cooling system with manufacturer's recommended antifreeze/water mixture.
3.Start vehicle and run engine until thermostat opens or normal operating temperature is reached.
4.Turn vehicle off and top off cooling system with antifreeze/water mixture when radiator cap can safely be removed. Leave Head Gasket & Block Treatment in cooling system for continued protection. Drive vehicle as normal. 

Important:
1.Follow the instructions precisely as described.
2.The car must cool down completely 3 times. This is very important! You will therefore generally have to leave the car in the garage for 3 days. Complete cooling down is deemed to be a minimum of 6 hours.
3.Flushing after step 1 (cleaning), is very important. Because the cleaning process loosens a lot of rust, this must be properly removed so that the water exiting the system runs clear before continuing with step 2.
4.Do not drive the car in the meantime nor move it in the slightest.
5.Use the correct kit! The 6 litres kit for up to 6 litres of coolant and the 10 litres kit for 7 to 10 litres of coolant.
6.We recommend that you uncouple the heat radiator and connect a bypass. This will rule out any problems with the heater.
7.It is possible to temporarily remove the thermostat.

 

 

 

 

 

Additional Info

Additional Info

Dosage Use the TORALIN Head Gasket Repair Kit for up to 10 litres of coolant.
Content Kit

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

You may also be interested in the following product(s)

R-134A UV Dye Aerosol 5 Applications

R-134A UV Dye Aerosol 5 Applications

Excl. Tax: €16.45 Incl. Tax: €19.90
Orifice Tube yellow for A/C system (Volvo)  3 pcs

Orifice Tube yellow for A/C system (Volvo) 3 pcs

Excl. Tax: €7.31 Incl. Tax: €8.85
O-Ring BMW-Ford-Opel-Saab-Volvo 9.30 x 2.52  (5 pcs.)

O-Ring BMW-Ford-Opel-Saab-Volvo 9.30 x 2.52 (5 pcs.)

Excl. Tax: €2.40 Incl. Tax: €2.90
Service Port Cap M 8 x 1 Low Side R134a (5 pcs. Pack)

Service Port Cap M 8 x 1 Low Side R134a (5 pcs. Pack)

Excl. Tax: €7.05 Incl. Tax: €8.53